Inside Chair Setup

1.

Start first row next to post

in2.png
  • This will keep all your rows looking the same as you reach other post

2.

Make the full first row off floor cut line

  • 8 chairs per row 

  • Under 190 guest Put front of chair on the cut line

  • If over 190 guest start the first row with the back of the chair on the cut line. 

in1.png
c3jpg.jpg
  • Once the first row is setup you will use the other cut line to begin building out row

  • Mirror the first row all the way to the back 

c4jpg.jpg
  • I use the inside isle chair to measure the distance between rows

c5jpg.jpg
  • Use the front and back of the measuring chair to decide on the row spacing

  • Keep a tight row do to limited amount of space

  • Unless it is like 100 guest count then space out to fill whole space 

c7.png
  • It's good practice to check how wide the row is around half way 

  • This helps to keep the full row the same width 

3.

Check rows 

c9.png
  • Use the inside concrete cut lines to check rows

  • It will let you know if both sides are close

4.

Walking Isle

c6jpg.jpg
  • If I have room and don't need to put chairs here I like to make a small walk way on each side